manualshive.com logo in svg

Hisun AXIS 110, Owner'S Manual, Page: 3 / 116

Share
Download
Hisun AXIS 110 Owner'S Manual Download Page 3

Owner's    Manual

 

INTRODUCTION 

Congratulations on your purchase of the Axis 110 or Forge 110 ATV. This Owner’s / Operator’s 

manual will provide you information regarding safe operation, operational instructions, maintenance 

and care. Fully understanding this manual and following all of the instructions herein will provide the 

knowledge needed to have a safe and enjoyable ATV operation.   

For questions regarding operation and maintenance of this ATV Please call Hisun Motors 

Corp USA at 972-446-0760 or visit us at 

www.hisunmotors.com

   

                          SAFETY – NOTICE TO PARENTS 

This is a Category Y-10+ ATV. A Category Y-10+ ATV is a youth model ATV that is intended for use 

by children age 10 or older.    Never allow a child to operate this ATV who is under age 10 .     

Continually supervise any child who is under age 16.       

Children differ in skills, physical abilities, and judgment. Some children may not be able to operate 

an ATV safely. Parents should supervise their child’s use of the ATV at all times. Parents should 

permit continued use only if they determine that the child has the ability to operate the ATV safely. 

Summary of Contents for AXIS 110





















































































































Reviews:

No comments