Hisense V43TX, User Manual

Page: 11 / 18

7 Troubleshoo�ng
Possible cause/solution
Problem
No recep�on on
the Parent Unit
Interference or
poor recep�on
• The power adapters may not be
properly connected.
• Ensure that the Baby and Parent Units
are ON.
• Adjust the monitor antenna to ver�cal
posi�on.
• Make sure the Baby and Parent Units
are not far away from each other.
• Baby and Parent Units may not be
properly paired. Follow PAIRING
instruc�ons on page 9.
Image frozen on
the Parent Unit
• Move the Baby unit closer to
Parent unit.
• Use of other 2.4GHz products, such as
wireless networks (Wi-Fi routers),
Bluetooth systems, or microwave
ovens, may cause interference with
this product, so keep the baby monitor
at least 5� (1.5m) away from these
types of products, or turn them off if
they appear to be causing interference.
• The Baby or Parent units may be too
close to metal objects.
• Other electronic devices may be
interfering with the signal.
• The ba�ery power may be too low.
• Restart the Baby Unit (unplug the power
adapter from the wall outlet, wait for
approx. 5 seconds and plug it back into
the wall outlet).
• Reset the Parent unit by disconnec�ng
(for 5 seconds) and reconnec�ng the
ba�ery pack.
11