Hisense RS-17DR1SS, User'S Operation Manual, Page: 7 / 28

6
△
!
WARNING !
When changing the side at which the
door opens, the appliance must not be
connected to the outlet. Remove plug
from the outlet beforehand.
Temperature Control
Insert the plug of the connection lead
into an outlet with protective earth
contact.
The temperature selector knob is
located on the side of the freezer
compartment.
Setting 0 means:
Turning the temperature control to "0"
position stops the cooling cycle, but
does not shut off the power to the
refrigerator.
Turn the knob clockwise to turn the
refrigerating uint on. Coldest setting is
all the way to highest number. The unit
operates automatically at the set
position.If the unit is unplugged, power
lost, or turned off, you must wait 3 to
5 minutes before restarting the unit. If
you attempt to restart before this time
delay, the refrigerator will not start.
Setting 1 means:
Highest temperature, warmest setting.
Setting 8 (end-stop) means:
Lowest temperature, coldest setting.
△
!
IMPORTANT !
Normally we advise you select setting
of 3 or 4, if you want the temperature
warmer or colder please turn the knob
to lower or higher setting accordingly.
Though the unit is energy efficient, it is
more efficient at lower position
settings.
△
!
IMPORTANT !
High ambient temperatures (e.g. on
hot summer days) and a cold setting on
the temperature regulator (position7 to
8) can cause the compressor to run
continuously or even non-stop!
Vacation Tips: If the appliance
will not be used for several
months:
●
Remove all food.
●
Unplug the power cord.
●
Clean and dry thoroughly.
●
Leave the door open slightly to
prevent
odour
and mold
growth .