Hisense LCD3233NEU, Service Manual

Page: 3 / 50

Service Manual
1. Product Safety Servicing Guidelines
WARNING:
Service should not be attempted by anyone unfamiliar with the
necessary precaution on this receiver. The following are the necessary
precaution to be observed before serving this chassis.
1. Since the power supply circuit of this receiver is directly connected
to the AC power line, an Isolation transformer should be used during any
dynamic service to avoid possible shock hazard.
2. When replacing a chassis in the cabinet, always be certain that all
the protective devices are put back in place, such as:
non-metallic control knobs, insulating cover, shields, isolation
resistor-capacitor network etc.
3. When replacing parts or circuit boards, disconnect the power cord.
4. When replacing a high wattage resistor (oxide metal film resistor)
on the circuit board, keep the resistor (1/2in) away from circuit board.
6. Connection wires must be kept away from components with high voltage
or high temperature.
7. If any fuse in this LCD TV receiver is blown, replace it with the FUSE
specified in the chassis part list.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the products enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock.