30
Part V Accessories Annexes
Appendix A
BIOS Set Up
1. Copy all files in the file directory of the compressed package to the U-disk root directory.
2. Connect only U-disk, not other storage devices, press F11 to boot, pull out the startup menu, select "UEFI:
Built-in EFI Shell" to enter the shell interface, and return.
3. Enter up to refresh BIOS on return.
4. When the refresh is completed, shut down and power off for 10 seconds.
5. Turn on the power and press F2 to enter BIOS Setup interface, then press F9 and F10 to optimize and save.
Note: Do not cut off the power supply, shut down or restart during BIOS refresh, otherwise the power will not
be able to start.
Appendix B
Super IO Information (BIOS default)
COM1: 3F8h/4
COM2: 2F8h/3
COM3: 3E8h/6
COM4: 2E8h/6
Cash Drawer
/*
This Demo program for POS box
CD_SENSE GP23
CD_OPEN GP36
*/
#include "stdio.h"
#include "conio.h"
#include "graphics.h"
#include "string.h"
#include "io.h"
#define BIT0 0x01
#define BIT1 0x02
#define BIT2 0x04
No.
Item
Qty
Note
1
POS
1
2
Adaptor
1
3
Power cable
1
Summary of Contents for HK560
Page 1: ...1 User Manual HK560 QingDao Hisense Intelligent Commercial System Co Ltd ...
Page 17: ...17 4 RFID test Open demo The operation steps are as follows ...
Page 23: ...23 Hardware Monitor ...
Page 32: ...32 Set_CD_OPEN High Set_CD_OPEN 1 Set_CD_OPEN Low Set_CD_OPEN 0 while 1 Get_CD_SENSE_Status ...
