Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Page: 71 / 196

Protection from unauthorized access
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
6.1 Password for SNMP access
71
6.1.2 Entering password for SNMP access
V
Select the
Security:Password / SNMPv3 access
dialog.
This dialog gives you the option of changing the read and read/write
passwords for access to the Switch via Web-based Interface/CLI/
SNMP. Please note that passwords are case-sensitive.
For security reasons, the read password and the read/write pass-
word must not be identical.
The Web-based Interface and the User Interface communicate via
SNMP version 3.
V
Select "Modify read-only password" to enter the read-only password.
V
Enter the new read-only password in the line "New password" and re-
peat the entry in the line “Please retype".
V
Select "Modify read-write password" to enter the read-write pass-
word.
V
Enter the new read-write password in the line "New password" and
repeat the entry in the line “Please retype".