manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 65

Loading Software Updates

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

4.3 Loading Software via HTTP

65

4.3 Loading Software via HTTP

For an http update you need access from your computer to the update soft-
ware.

V

Select the 

Basics:Software

 dialog.

V

Click “http-Update” to open the http Update browser window.

V

Click “Browse...” (or “Search...”) to select the software (switch.bin) on 
your PC for the update.

V

Click “Update”, to transfer the software to the Switch.

The end of the update is indicated by one of the following messages:

D

Update completed successfully.

D

Update failed. Reason: incorrect file.

D

Update failed. Reason: file damaged.

D

Update failed. Reason: flash error.

Fig. 20:

Dialog Software-Update via http

 

V

Close this browser window with 

"File: close"

 to return to the 

software dialog.

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands