Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Page: 49 / 196

Entering the IP parameters
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
2.9 Faulty Device Replacement
49
2.9 Faulty Device Replacement
There are two plug-and-play solutions available for replacing a faulty Switch
with a Switch of the same type
(Faulty Device Replacement):
D
First, you can configure the new switch using an AutoConfiguration
Adapter
(see “Loading the system configuration from the ACA” on page 37 )or
D
Second, you can configure the new switch using DHCP Option 82
(see “Entering the IP parameters via HiDiscovery” on page 35 ).
In both cases, the same configuration data which the faulty Switch had are
transferred to the new Switch during booting.