manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 20

Access to the user interfaces

20

1.2 Command Line Interface

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

Fig. 3:

Logging in to the Command Line Interface program

V

Enter a username. The state on delivery value for the username is 

admin

. Press the Enter key.

V

Enter the password. The state on delivery value for the password is 

private

. Press the Enter key.

 

You can change the username and the password later in the Com-
mand Line Interface. 

 

Note that these entries are case-sensitive.

The start screen then appears.

  
 
 

         Copyright (c) 2004-2005 Hirschmann Automation and Control GmbH

                             All rights reserved

                        PowerMICE Release L3P-01.0.00-K16

                        (Build date 2005-10-31 19:32)

                       System Name:  PowerMICE
                       Mgmt-IP    :  149.218.112.105
                       1.Router-IP:  0.0.0.0
                       Base-MAC   :  00:80:63:51:74:00
                       System Time:  2005-11-01 16:00:59

User:

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands