Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Page: 19 / 196

Access to the user interfaces
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
1.2 Command Line Interface
19
1.2 Command Line Interface
The Command Line Interface allows you to use all device functions via a local
or a remote connection.
The command line interface provides IT specialists with a familiar environ-
ment for configuring IT devices.
The script ability of the Command Line Interfaces allows to feed several
devices with identical configuration data.
For a detailed description of the Command Line Interface, see the Reference
Guide „Command Line Interface“.
The Command Line Interface can be accessed via
D
the V.24 (out-of-band) port or
D
Telnet (in-band).
Note: To facilitate making entries, the CLI offers the option of abreviating
keywords. Type in the first letters of the keyword. If you now press the Tab
key, the CLI will complete the keyword, i.e. add the remaining letters for you.
U
Opening the Command Line Interface
V
Connect the Switch via the V.24 interface to a terminal or to a COM
port of a PC with terminal emulation according to VT 100 and press
any key (see
“Opening the system monitor” on page 16 ) or start the
Command Line Interface via Telnet.
A window in which you are asked to enter your username appears on
the screen.
A maximum of five users are permitted to access the Command Line
Interface.