manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 166

Setting up DHCP Server and TFTP

160

A.2 Setting up DHCP Server Option 82

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

A.2 Setting up DHCP Server 

Option 82

On the CDROM supplied with the switch you will find the software for a DHCP 
server from the software development company IT-Consulting Dr. Herbert 
Hanewinkel. You can test the software for 30 calendar days from the date of 
the first installation, and then decide whether you want to purchase a license.

V

To install the DHCP server on your PC

 

insert the CD-ROM into the CD drive of your PC and

 

under Additional Software, select “haneWIN DHCP-Server”.

 

To carry out the installation, follow the installation assistant.

V

Start the 

DHCP Server

 program.

Fig. 66:

Start window of the DHCP server

Note: 

The installation procedure includes a service which is automatically 

started in the basic configuration when switching on Windows. This service 
is even active if the program itself has not yet been started. The service star-
ted answers DHCP queries.

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands