manualshive.com logo in svg

Hirschmann MACH 4000 Series, User Manual

Share
Download
Hirschmann MACH 4000 Series User Manual Download Page 35

Entering the IP parameters

Basic - L3P

Release 3.1 06/07

2.3 Entering the IP parameters via HiDiscovery

35

2.3 Entering the IP parameters 

via HiDiscovery

The HiDiscovery protocol enables you to assign IP parameters to the Switch 
via the Ethernet.

 

You can easily configure additional parameters with the Web-based mana-
gement (see Reference manual  „Web-based Interface“).

Install the HiDiscovery software on your PC. The software is on the CD sup-
plied with the Switch.

V

To install it, you start the installation program on the CD.

Note: 

The installation of HiDiscovery involves installing the WinPcap Version 

3.0 software package. 

 

If an earlier version of WinPcap is already installed on the PC, then you must 
first uninstall it. A newer version remains intact when you install HiDiscovery. 
However, this can not be guaranteed for all future versions of WinPcap. In 
the event that the installation of HiDiscovery has overwritten a newer version 
of WinPcap, then you uninstall WinPcap 3.0 and then re-install the new ver-
sion.

V

Start the HiDiscovery program.

Fig. 10:

HiDiscovery 

Summary of Contents for MACH 4000 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands