manualshive.com logo in svg

Hirschmann MACH 4000 Series, User Manual

Share
Download
Hirschmann MACH 4000 Series User Manual Download Page 185

Operation Diagnostics

Basic - L3P

Release 3.1 06/07

9.8 Topology discovery

185

This information can be called  up from a network management station. With 
this information, the network management station is able to display the topo-
logy of the network.

LLDP uses an IEEE-MAC address for exchanging information. This address 
is normally not routed by switches. This is why switches without LLDP 
support drop the LLDP packets. Consequently, a non-LLDP-capable device 
between two LLDP-capable devices prevents the exchange of LLDP infor-
mation. To avoid this, Hirschmann Switch send additional LLDP packets to 
the Hirschmann Multicast-MAC address 01:80:63:2F:FF:0B. Hirschmann 
Switch with the LLDP function are thus also able to exchange LLDP informa-
tion with each other via devices which themselves are not LLDP-capable.

The Management Information Base (MIB) of an LLDP capable Hirschmann 
Switch holds out the LLDP information in the lldp-MIB and in the private 
hmlldp-MIB.

Summary of Contents for MACH 4000 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands