manualshive.com logo in svg

Hirschmann MACH 4000 Series, User Manual

Share
Download
Hirschmann MACH 4000 Series User Manual Download Page 126

Traffic control

126

8.2 Multicast application

Basic - L3P

Release 3.1 06/07

8.2 Multicast application

8.2.1 Description multicast application

The data distribution in the LAN distinguishes between three distribution 
classes with reference to the addressed recipient:

D

Unicast - one recipient

D

Multicast - a group of recipients

D

Broadcast - every recipient that can be reached

In the case of a Multicast address, Switches pass on all the data packets with 
a Multicast address to all the ports. This leads to an increased bandwidth re-
quirement. 

 

Protocols such as GMRP and processes such as IGMP Snooping enable the 
Switches to exchange information by means of the targeted distribution of  
Multicast data packets. The distribution of the Multicast data packets exclu-
sively to those ports to which the recipients of these Multicast data packets 
are connected, reduces the bandwith required.

You can recognize IGMP Multicast addresses by the area in which an 
address is located:

D

MAC multicast address

 

01:00:5E:00:00:00 - 01:00:5E:FF:FF:FF

D

IP multicast address class D

 

224.0.0.0 - 239.255.255.255

Summary of Contents for MACH 4000 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands