Hirschmann MACH 1000, Reference Manual

Page: 301 / 572

CLI L2P
Release 7.0 05/2011
4.11 System Utilities
301
4.11.27reboot
This command resets the switch (cold start) after a given time delay, for warm
start
See “reload” on page 302 . Reset means that all network connections
are terminated and the boot code executes. The switch uses the stored con-
figuration to initialize the switch. You are prompted to confirm that the reset
should proceed. A successful reset is indicated by the LEDs on the switch.
Format
reboot {delay <seconds>}
Mode
Privileged EXEC
<seconds>
The number of seconds after which the switch will reboot.
Value range: None (no reboot sceduled), 0 - 2,147,483 sec (= 596 h +
31 min + 23 sec).
U
clear reboot
This command cancels a scheduled reboot.
4.11.28show reboot
This command displays if a reboot is sceduled for the device. If sceduled, the
command displays the number of seconds after which the switch will reboot.
Format
show reboot
Modes
Privileged EXEC
User Exec