Hirschmann MACH 1000 Reference Manual Download Page 135

Page: 135 / 572

CLI Commands: Base

CLI L2P

Release 7.0 05/2011

4.6 Management Commands

135

Port Security (MAC, IP and 802.1X)

Enable/disable sending port security event traps (for MAC/IP port
security as well as for 802.1X).

Spanning Tree Flag

May be enabled or disabled. The factory default is enabled. Indicates
whether spanning tree traps will be sent.

4.6.47 snmp-access global

This command configures the global SNMP access setting (for all SNMP
versions).

Format

snmp-access global {disable|enable|read-only}

Mode

Global Config

disable

Disable SNMP access to this switch, regardless of the SNMP version
used.

enable

Enable SNMP read and write access to this switch, regardless of the
SNMP version used.

read-only

Enable SNMP read-only access to this switch (disable write access),
regardless of the SNMP version used.

Summary of Contents for MACH 1000





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MACH 1000

Reviews:

Brands by name

Popular brands

Hirschmann MACH 1000, Reference Manual

Search results

Summary of Contents for MACH 1000

Reviews:

Brands by name

Popular brands