Change
Changing the mains fuse
ATTENTION
:
Danger of electric shocks !
Disconnect the IRD 8500/.. from the mains before
changing the fuse !
Procedure
1. Disconnect the IRD 8500/.. from the mains.
2. The fuseholder is located beside the mains socket. Open the bayonet lock of the
fuse holder with a screw driver.
3. Replace the defective fuse ( 5x20 mm). The fuses have, depending on the mains
voltage, the following values:
l
230 V mains connection
0,315 AT
l
115 V mains connection
0,63 AT
Changing the battery
ATTENTION
:
Danger of electric shocks ! Disconnect the IRD 8500/.. from the
mains before
changing the battery !
WARNING
:
Improper change of the battery may cause an explosion.
Replacement only by the same or an equivalent type
recommended by the manufacturer !
ATTENTION
:
Lithium batteries must not be disposed of as domestic waste !
Send the used batteries back to the manufacturer or
supplier. Address of the manufacturer of the battery:
Firma RENATA AG
Kreuzenstr. 30
CH-4452 Itingen
NOTE
:
The data in the ERROR history and the note entries ( when using
in the network ) get lost when the battery is changed.
Maintenance
IRD 8500/..
Intergrated Receiver Decoder
4 - 5
