Configuration / Identification
Device identification
Menu “Device ID: menu”
For device identification in a network additional information of the device can be sto-
red. The following sub-settings are possible:
for example:
l
ID: long name
[ 30 characters ]
*** Hirschmann ***
l
ID: short name
IRD 8500
(pre-assigned)
l
ID: rack
[ 2 characters ]
A1
l
ID: mainframe
[ 2 characters ]
10
l
ID: location
[ 20 characters ]
Rankweil 3
l
ID: network
[ 30 characters ]
Rheinmetall
l
ID: channel
[ 30 characters ]
evaluation 8500
Device identification
Menu “Module info
The information about the current device configuration can be queried. For each
mounted assy the following information is available:
l
SW-Vers
Current software-version
l
GUI-V.
Version for the graphical user interface
l
Ord.Nr.
Hirschmann ordering number
l
Ser.Nr.:
Serial number of the assy
l
G-Nr.
Hardware version of the assy
l
SG-Nr.
Software-version of the assy
l
Prod.
Date of production
l
Rep.
Date of last repair
l
Build:
Number of compiling
If information is not available (e.g. the assy has no software) the message “—” is dis-
played.
Status display / history / operation log
Status messages
Menu “Device status”
If status messages are present, the message with the highest priority is scrolled
across the upper line of the display in the main menu.
NOTE
:
The submenus do not contain a status line.
After booting the device the upper line of the display shows “IRD 8500 all ok” as well
as the name stored under “Setup\Device ID: menu\Device ID:long name”
Further messages about current errors, alarms and warnings can be queried.
The message text can be seen by selecting the next submenu. By using the cursor
keys, the individual message texts can be read as a whole.
(exit with ESC-key)
If an error or warning message appears on the LC-display, it is likely that you will find
some additional information in the history.
Menu operation
IRD 8500/..
3 - 6
Intergrated Receiver Decoder
