Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 571 / 619

Advanced functions of the device
14.4 MRP-IEEE
231
UM Config GRS
Release 8.0 09/2019
To enable the
MMRP
function on the switches, proceed as follows.
Perform the following steps:
To enable the MMRP ports on switch 1, use the following commands. Substituting the appropriate
interfaces in the commands, enable the MMRP functions and ports on switches 2 and 3.
14.4.4 MVRP
The Multiple VLAN Registration Protocol ( MVRP ) is an MRP application that provides dynamic
VLAN registration and withdraw services on a LAN.
The MVRP function provides a maintenance mechanism for the Dynamic VLAN Registration
Entries, and for transmitting the information to other devices. This information lets MVRP -aware
devices establish and update their VLAN membership information. When members are present on
a VLAN, the information indicates through which ports the switch forwards traffic to reach those
members.
The main purpose of the MVRP function is to allow switches to discover some of the VLAN
information that you otherwise manually set up. Discovering this information lets switches
overcome the limitations of bandwidth consumption and convergence time in large VLAN networks.

Open the Switching > MRP-IEEE > MMRP dialog, Configuration tab.

To activate port
1
and port
2
as MMRP participants, mark the checkbox in the MMRP column
for port
1
and port
2
on switch
1
.

To activate port
3
and port
4
as MMRP participants, mark the checkbox in the MMRP column
for port
3
and port
4
on switch
2
.

To activate port
5
and port
6
as MMRP participants, mark the checkbox in the MMRP column
for port
5
and port
6
on switch
3
.

To send periodic events allowing the device to maintain the registration of the MAC
address group, enable the Periodic state machine . Select the On radio button in the
Configuration frame.

To save the changes temporarily, click the button.
enable
Change to the Privileged EXEC mode.
configure
Change to the Configuration mode.
interface 1/1
Change to the interface configuration mode of
interface
1/1
.
mrp-ieee mmrp operation
Enabling the MMRP function on the port.
interface 1/2
Change to the interface configuration mode of
interface
1/2
.
mrp-ieee mmrp operation
Enabling the MMRP function on the port.
exit
Change to the Configuration mode.
mrp-ieee mrp periodic-state-machine
Enabling the Periodic state machine function globally.
mrp-ieee mmrp operation
Enabling the MMRP function globally.