Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 51 / 619

Basic Settings
[ Basic Settings > Port ]
50
RM GUI GRS
Release 8.0 09/2019
To reset the counter for the port statistics in the table to 0 , proceed as follows:

In the Basic Settings > Port dialog, click the button and then the Clear port statistics item.
or

In the Basic Settings > Restart dialog, click the Clear port statistics button.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13 .
Clear port statistics
Resets the counter for the port statistics to 0 .
[ Utilization ]
This tab displays the utilization (network load) for the individual ports.
Table
Port
Displays the port number.
Utilization [%]
Displays the current utilization in percent in relation to the time interval specified in the Control
interval [s] column.
The utilization is the relationship of the received data quantity to the maximum possible data
quantity at the currently configured data rate.
Lower threshold [%]
Specifies a lower threshold for the utilization. If the utilization of the port falls below this value, then
the Alarm column displays an alarm.
Possible values:

0.00..100.00 (default setting: 0.00 )
The value 0 deactivates the lower threshold.
Upper threshold [%]
Specifies an upper threshold for the utilization. If the utilization of the port exceeds this value, then
the Alarm column displays an alarm.
Possible values:

0.00..100.00 (default setting: 0.00 )
The value 0 deactivates the upper threshold.