Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 468 / 619

Network load control
10.4 QoS/Priority
128
UM Config GRS
Release 8.0 09/2019
Assign port priority to received data packets
Perform the following steps:
Assigning DSCP to a traffic class
Perform the following steps:
classofservice dot1p
-
mapping 1 2
Assigning a VLAN priority of
1
to traffic class
2
.
exit
Change to the Privileged EXEC mode.
show classofservice dot1p
-
mapping
Display the assignment.
enable
Change to the Privileged EXEC mode.
configure
Change to the Configuration mode.
interface 1/1
Change to the interface configuration mode of
interface
1/1
.
classofservice trust untrusted
Assigning the
untrusted
mode to the interface.
classofservice dot1p
-
mapping 0 2
classofservice dot1p
-
mapping 1 2
Assigning a VLAN priority of
0
to traffic class
2
.
Assigning a VLAN priority of
1
to traffic class
2
.
vlan priority 1
Specifying the value
1
for the port priority.
exit
Change to the Configuration mode.
exit
Change to the Privileged EXEC mode.
show classofservice trust
Displaying the Trust mode of the ports/interfaces.
Interface Trust Mode
--------- -------------
1/1 untrusted
1/2 dot1p
1/3 dot1p
1/4 dot1p
1/5 dot1p
1/6 dot1p
1/7 dot1p

Open the Switching > QoS/Priority > IP DSCP Mapping dialog.

Specify the desired value in the Traffic class column.

To save the changes temporarily, click the button.
enable Change to the Privileged EXEC mode.
configure Change to the Configuration mode.