Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 426 / 619

Configuring the ports
6.1 Enabling/disabling the port
86
UM Config GRS
Release 8.0 09/2019
6 Configuring the ports
The following port configuration functions are available.

Enabling/disabling the port

Selecting the operating mode
6.1 Enabling/disabling the port
In the default setting, every port is enabled. For a higher level of access security, disable
unconnected ports.
Perform the following steps:

Open the Basic Settings > Port dialog, Configuration tab.

To enable a port, mark the checkbox in the Port on column.

To disable a port, unmark the checkbox in the Port on column.

To save the changes temporarily, click the button.
enable Change to the Privileged EXEC mode.
configure Change to the Configuration mode.
interface 1/1 Change to the interface configuration mode of
interface
1/1
.
no shutdown Enable the interface.