Hirschmann GREYHOUND GRS1020, Reference Manual

Page: 409 / 619

Managing configuration profiles
4.2 Saving the settings
69
UM Config GRS
Release 8.0 09/2019
4.2 Saving the settings
4.2.1 Saving the configuration profile in the device
If you change the settings of the device during operation, then the device stores the changes in its
memory ( RAM ). In order to keep the changes after a reboot, save the configuration profile in the non-
volatile memory ( NVM ).
Saving a configuration profile
The device stores the settings in the "selected" configuration profile in the non-volatile memory
( NVM ).
Perform the following steps:

Open the
Basic Settings > Load/Save
dialog.

Verify that the required configuration profile is "Selected".
You can recognize the “selected” configuration profile because the checkbox in the
Selected
column is marked.

Click the button.
show config profiles nvm
Displays the configuration profiles contained in the
non-volatile memory (
nvm
).
enable
Change to the Privileged EXEC mode.
save
Save the settings in the non-volatile memory (
nvm
)
in the “selected” configuration profile.