background image

HiRO 2.4GHz Wireless

Keyboard, Mouse,& Touchpad

User's Manual

Be sure to carefully read this User's Manual for the proper use and 
keep it for future reference.

Thank you for choosing 

HiRO 2.4GHz Wireless Keyboard, 

Mouse,& Touchpad

. This genuinely palm-sized 3-in-1 device has 

four (4) function including standard American QWERTY keyboard, 
Laser mouse, Multi-touchpad and Presentation control. With our 
superb 2.4GHz technology, the wireless control distance is 

up to 70 

meters

 (line of sight) with extreme low power consumption. Please 

read through this manual and then start enjoying the marvel and 
convenience this device brings at home, office or on travel.

Package Contents

1. HiRO 2.4GHz Wireless Keyboard, Mouse,& Touchpad....
2. USB Receiver 

(Embedded onto the battery cover)

................

3. BL-5C Rechargeable Battery........................................
4. Mini USB Charging Cable.............................................
5. User's Manual.............................................................

System Requirements

Windows®  2000 / XP / Vista™ / 7
An available USB port in PC

Getting Started

1. Plug the USB receiver to PC USB port

Take out the USB receiver embedded onto the battery cover and 
plug the USB receiver to your PC USB port.

Steps of taking out USB receiver

Steps of inserting USB receiver

2. Insert the battery

Slightly press and slide the battery cover and insert the battery 
firmly with the correct polarity. Replace the battery cover firmly 
back into place.

Slightly press and slide 
the battery cover

Insert the battery

Replace the battery 
cover

Special notice

Before 1st time use

, please connect the battery charging cable 

to charge the battery about 2 hours. See the introduction of “

Low 

Battery Indication and Charge Battery

” for battery charging.

Now you can start to use 

HiRO 2.4GHz Wireless Keyboard, Mouse,

& Touchpad

. Please note that the default mode of computer mouse is 

at Multi-Touchpad. For details of mouse mode change and other 
function and operation, please read the introduction of “

Function 

and Operation

”.

X1
X1
X1
X1
X1

Trademarks

Windows are registered trademark of Microsoft Corporation.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions : (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiated radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures:

 

- Reorient or relocate the receiving antenna.

 

- Increase the separation between the equipment and receiver.

 

- Connect the equipment into an outlet on a circuit different from that to which the receiver 

    is connected.

 

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

F

EDERAL

 C

OMMUNICATION

S C

OMMISSION

This product: is carrying the CE-Mark in accordance with the related European Directives. 

EU D

ECLARATION

 

OF

 C

ONFORMITY

©2011 All rights reserved.

1

2

2

2

2

1

1

1

RoHS

(2)

(1)

Low Battery Indication and Charge Battery

1. Low battery indication

When battery power is detected at low capacity, press any key, 
button or touchpad of keyboard mouse, its 

red

 indication 

LED

 will 

light up to remind you battery power is low. Please charge the 
battery soon to have a stable performance.

2. Charge battery

Connect supplied battery charging cable between this product and 
the USB port in your PC to charge the battery. During charging, red 
LED will regularly blink and when the battery is fully charged, the 
red LED will off.

Note

 Battery charging time depends on remaining battery power, operation 

condition and working environment etc. Besides, the rechargeable battery 
has a certain life of charging cycles and when you find charging time 
becomes extra longer, you may need to replace with new rechargeable 
battery.

Connection port for
battery charging cable

ID Pairing

(1) Click the ID Link button on USB receiver and its red LED will light up 
      and enter into 

20

-second ID pairing stand-by time. 

Battery power is normal and keyboard mouse and USB receiver is 
within connection distance but the product cannot be operated 

OR

 

when you want to use plural of this product at the same time.
You need to conduct ID pairing with following two (2) steps to shun 
interference:

Note No need to conduct ID pairing whenever you want to use this 
product, UNLESS following operation situation.

(2) Within the 20-second stand-by time, press the pairing button in the 
      battery chamber of keyboard mouse until the red LED of USB 
      receiver becomes blinking for 3 times which means the ID pairing 
      has been successfully done.

Specifications

Frequency : 2400 ~ 2483 MHz
Channel number : 16
ID number per Channel : 65,535
Modulation : GFSK
Antenna type : PCB track
Wireless range : Up to 230 feet (70 meters) (line of sight)
Working voltage : DC 3.0V ~ 3.8V
Battery : BL-5C 850mA-hour Li-Ion rechargeable battery
Transmission power : 1mW
Power consumption / Battery continuous operation hours : 

    

Standby(Non-operation) : 0.4mA / 2125 hours

    

Keyboard mode : 1mA / 850 hours

    

Touchpad mode : 10mA / 85 hours 

    

Laser mouse & Touchpad mode : 30mA / 28.3 hours

Weight : About 92 grams (including battery and receiver)
Dimension : Approx. 116 (L) x 56 (W) x 19.8 (H) mm
Operation temperature : 0°C(32°F)~60°C(140°F)
Operation humidity : 10%~85% RH

FAQ

Q1. Need to install software before using this product?
A: 

No need. This is Plug-and-Play product.

Q2. Why sometimes touchpad can not be operated smoothly?
A: 

Touchpad is quite sensitive about moistness. In order to have a 
stable performance on touchpad, please always keep touch 
finger(s) dry.

Q3. Can not control laser mouse, touchpad and keyboard
A: 

It may be caused by low battery or interference by other 2.4GHz 
product. Please see introductions “

Low Battery Indication and 

Charge Battery

” and “

ID Pairing

” to verify and resolve.

Q4. Possible to know the mouse dpi?
A: 

It is no way to know mouse dpi and you can only feel laser mouse 
move speed after selected dpi.

Note

 If pressing again the ID Link button during 20-second stand-by time, ID 

          pairing action will be discontinued.

Patent Pending

Reviews: