HiQuick C9027, User Manual

Page: 9 / 27

07
EN
WARNINGS
To avoid personal injury and property damage from, but not limited to, the
risk of electric shock or fire.
DO NOT disassemble and reassemble the charger, or it may cause
short-circuit.
DO NOT charge batteries whose cover are damaged, or it may cause short
circuit and a fire hazard.
DO NOT charge non-rechargeable batteries or other types of batteries. It
may cause battery leakage, battery explosion,personal injuries, and etc.
DO NOT put anything on the charger while charging batteries, it will
accumulate heat and then cause a fire hazard.
DO NOT install the battery inversely, or it may cause short circuit or a fire
hazard.
Indoor use only, keep it away from direct sunlight or moist/high-temperature
environment.
Children should not use this charger without any adult supervision.
Please use the power cable provided by HiQuick.
Place the batteries into the charger correctly by making sure the +/- pole
of battery matches the +/- pole of the charger.
Please connect 5V/2A adapter before installing batteries.
The charger can charge each battery independently.
The absolute 0 Volt battery can not be charged with this charger.
C9027 is ONLY designed for AA/AAA Ni-MH rechargeable batteries.
Please DO NOT put any other types of batteries in this charger, especially
alkaline batteries.
New battery will reach its best performance after 3-5 times of charge-discharge
cycles.
Battery power will lose because of long-time storage, please charge the
battery fully before using it again.
It's normal that the battery becomes hot while charging. The temperature
will cool down to normal later, please feel free to use it.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.