- 16 -
Replacement of the main motor unit
Replace the motor after it is damaged.
•
Remove the cover from the body. (During removal,
as in the diagram on the right, the cover mounting
screws should be removed together with the front
cover, leaving the four screws of the rear in place.)
•
Remove the motor trunk connector.
•
Remove the motor mounting screws on the motor’s
bottom face.
•
Pull out the motor section from the rear of the body.
(To facilitate removal, insert a hexagonal wrench
or the like into the long hole of the body base and
push the motor mounting bracket backward.)
•
Be careful not to break motor wires by using overly
excessive force.
Caution
: Unplug the AC adapter from the wall outlet
before disassembly of the motor section.
Remove the cover.
Remove the motor trunk connector.
Remove the motor mounting
screws (M2.6 × 8 2pieces)
Push the motor mounting
braket backwrd.
The long hole
Pull out the motor section
from the rear of the body.
Main motor unit
