3
Message Terminators
This instrument recognizes the following message terminators (delimiters):
•
CR+LF
Separators
(1) Message Unit Separator
Multiple messages can be written in one line by separating them with semicolons “;”.
:RANGE:R 1
; *
IDN?
• When messages are combined in this way and if one command contains an error, all subsequent messages up
to the next terminator will be ignored.
(2) Header Separator
In a message consisting of both a header and data, the header is separated from the data by a space “ ” (ASCII
code 20H).
:RANGE:R
1
(3) Data Separator
In a message containing multiple data items, commas are required to separate the data items from one another.
:TARGET:DEVIATION:X 0.3333
,
0.01