Hioki SW1001, Instruction Manual, Page: 41 / 164

37
Channel Delay Function
3.7 Channel Delay Function
The delay time after channel switching can be specified. When the specified delay time elapses
after the channel relay is closed, a CLOSE signal of EXT. I/O is output.
If the measurement response time for the instrument needs to be ensured, set the delay time.
The required delay time depends on the instrument to be used and the measuring object.
Channel delay time setting example
Model Delay time
BT4560 1 ms
BT3562 10 ms
3561 3 ms
DM7276 0 ms
The channel delay time can be specified for each slot. The same delay time is used for all channels
within the slot.
For the switching sequence, see "3.4 Channel Switching Operation" (p. 31)
Item Communication command
Setting
procedure
:SYSTem:MODule:DELay <
slot No.
>,<
delay time
0
to
9.999[
s
]>
Setting
example
Set the channel delay time for SLOT 1 to 0.01 sec. and for SLOT 2 to 0 sec.
:SYST:MOD:DEL 1,0.01
:SYST:MOD:DEL 2,0
3
Channel Switching