Hioki SW1001, Instruction Manual, Page: 155 / 164

151
Rack Mount
L-shape bracket (For installing the module in automated equipment)
L-shape bracket
Unit: mm
3× φ 3.5
420
30
30 30
10
8×C3
20
10
10
2×C3
Note: Align the holes with the base prepared by the customer.
Attachment procedure (Example: SW1001)
1
Remove the four screws shown
in the figure and remove the
rubber feet from the bottom.
2
Remove the screws on the left
and right sides shown in the
figure (three screws each).
L-shape bracket
3
Attach the L-shape bracket.
Use M3 × 8 screws for three places
each on the left and right sides to
secure the bracket.
4
Secure it to a base.
12
Appendix