Hioki SW1001, Instruction Manual, Page: 13 / 164

9
Parts Names and Functions
Rear
The illustration shown here is for the SW1001.
1
6 7 8 9
3
2
4
5
10
11
No. Name Description Reference
1
Power switch Turns on/off the power. p. 23
2
Power inlet
Used to connect the provided power cord. p. 23
3
EXT. I/O terminal Used to connect the device to be externally controlled. p. 51
4
EXT. I/O MODE
change-over switch
Left: Sinking current (NPN), Right: Sourcing current (PNP) p. 50
5
Communication
setting mode switch
Perform communication using fixed settings when the
communication settings are unknown.
p. 22
6
USB connector
Used to connect the PC. p. 64
7
HOST
RS-232C connector
Used to connect the PC. p. 66
8
INSTRUMENT
RS-232C connector
Used to connect the RS-232C connector of the instrument for
scan measurement.
p. 70
9
LAN connector Used to connect the PC. p. 60
10
Serial number
The serial number consists of 9 digits. The first two (from
the left) indicate the year of manufacture, and the next two
indicate the month of manufacture.
Required for production control. Do not peel off the label.
–
11
MAC address MAC address of the LAN. p. 105
1
Overview