Hioki ST5680 Instruction Manual Download Page 94

Page: 94 / 253

Gradual Voltage Rise Test

7.3 Gradual Voltage Rise Test

Setting the test conditions

Setting the test method

Press

[BASIC]

[BDV MODE]

to set the test

method to

[STEP]

(When

[BDV MODE]

is set to

[RATE]

)

A confirmation message is displayed.

Press

[YES]

The output settings are initialized.

Setting the initial voltage

The initial voltage is set.
Press the

START

button and wait till the voltage reaches the initial voltage after 0.1 seconds.

Perform the test according to the set voltage holding time, voltage step, and number of steps.

Press

[BASIC]

[START VOLT]

on the setting

screen.

Change the value using

[▲]

[▼]

and then

press

[ENTER]

0.25 kV

0.5 kV

1 kV

2 kV

, any voltage

Setting range:

0.010 kV

7.999 kV

*1. Default setting

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Search results

Summary of Contents for ST5680

Reviews:

Hioki ST5680, Instruction Manual, Page: 94 / 253

Search results

Summary of Contents for ST5680

Reviews: