Hioki ST5680, Instruction Manual, Page: 50 / 253

50
Setting the Voltage Rise Time
4.10 Setting the Voltage Rise Time
The time period from the start of a test until the test voltage is reached or from the start voltage until
the test voltage is reached can be set.
DCW setting
1 1
1
Press [BASIC] > [RISE TIME] on the setting
screen.
2 2
2
Change the value using [▲] or [▼] and then
press [ENTER] .
0.1 s *
1
to 300 s
*1. Default setting
The lower limit is set by [TEST TIME] (test time) and
[DELAY] (judgment wait time).
[DELAY] < [RISE TIME] + [TEST TIME]
(Only when [DELAY] is not set to off)
IR setting
1 1
1
Press [BASIC] > [RISE TIME] on the setting
screen.
2 2
2
Change the value using [▲] or [▼] and then
press [ENTER] .
0.1 s * 2 to 300 s
*2. Default setting
The lower limit is set by [TEST TIME] (test time) and
[DELAY] (judgment wait time).
[DELAY]
<
[RISE TIME]
+
[TEST TIME]
(Only when [DELAY] is not set to off)
HIOKI ST5680A961-00