manualshive.com logo in svg

Hioki ST5680, Instruction Manual, Page: 191 / 253

Share
Download
Hioki ST5680 Instruction Manual Download Page 191

191

Connecting and Setting LAN

Setting procedure

You can implement command control using TCP/IP protocols.
Set the instrument according to the network environment in use beforehand.

IMPORTANT

 •Make sure to make the LAN settings before connecting to the network.

 •

If you change the settings while the instrument is connected to a network, the instrument may have the 

same IP address as another device on the LAN, causing incorrect address information to be sent to the 

LAN.

 •The instrument is not compatible with network systems that automatically acquire IP addresses using 

DHCP.

Explanation of setting items

IP address

An address to identify individual devices that are connected on the network.
Use a unique address that no other device on the network is using.

The instrument uses IP version 4, and IP addresses are expressed as a series of four decimal 
numbers separated by periods, as in 

192.168.0.1

.

Subnet mask

This setting separates the IP address into the network address part showing the network and 
the host address part showing the device. Displays on the instrument use 4 decimal numbers 
separated using “.” as in 

255.255.255.0

.

Default gateway

If the PC and instrument that are in communication are on different networks, specify the IP 

address of the device that will act as the gateway.

If not using a gateway, such as with 1-to-1 connections, set the instrument to “0.0.0.0”.

Network environment configuration example

Example 1: Connecting the instrument to the existing network

If connecting the instrument to an existing network, it is necessary to check the network settings 

beforehand.
It is necessary to allocate IP addresses so that they do not overlap with other network devices.

Check the following items with the network administrator, and keep a memo.

IP address  

 

_________._________._________._________

Subnet mask  

 

_________._________._________._________

Default gateway    

_________._________._________._________

Communications

 (USB,

 LAN,

 RS-232C,

 GP-IB)

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Reviews:

No comments