manualshive.com logo in svg

Hioki ST5680, Instruction Manual, Page: 16 / 253

Share
Download
Hioki ST5680 Instruction Manual Download Page 16

16

Usage Notes

Installation

 •

Leave at least the specified space on every surface to keep the instrument’s temperature from 

rising.

 • Place with its bottom side facing downward.
 • Leave at least 15 mm of space underneath the installation surface (the height of its feet).
 • Do not block vent openings.

Rear: 50 mm or more

Side: 50 mm or more

Handling the instrument

 DANGER

 

„

Never remove the enclosure.

The internal components of the instrument carry high voltages and may become very 

hot during operation. Touching them could cause burns or electric shock.

 CAUTION

 

„

Do not subject the instrument to vibration or mechanical shock while 

transporting or handling it.

 

„

Do not drop the instrument onto a floor or other surface.

Doing so could damage the instrument.

The instrument is an EN 61326 Class A product.
This instrument may cause interference if used in residential areas. Such use must be avoided 
unless the user takes special measures to reduce electromagnetic emissions to prevent 
interference to the reception of radio and television broadcasts.

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Reviews:

No comments