manualshive.com logo in svg

Hioki ST5680, Instruction Manual, Page: 13 / 253

Share
Download
Hioki ST5680 Instruction Manual Download Page 13

13

Safety Notes

Safety Notes

This instrument is designed to conform to IEC 61010 Safety Standards and has been thoroughly 
tested for safety prior to shipment. Using the instrument in a way not described in the Instruction 
Manuals may negate the provided safety features.

Before using the instrument, be sure to carefully read the following safety precautions.

 DANGER

 

„

Read the instruction manual and understand the contents.

Otherwise, the user may use the instrument improperly, which could result in serious 

bodily injury or damage to the instrument.

 WARNING

 

„

If using electric measuring instruments for the first time, perform 

measurement under the supervision of someone with experience.

Failure to do so could cause the operator to experience an electric shock.

In addition, there are risks of heat generation, fire, and arc discharge due to short 

circuits.

Protective gear

 DANGER

Be sure to observe the following to avoid fatal electric shock accidents.

 

„

Be sure to wear high-voltage protective rubber gloves while performing 

procedures.

The internal components of the instrument carry high voltages and may become very 

hot during operation. Touching them could cause burns or electric shock.

HIOKI ST5680A961-00

Summary of Contents for ST5680






























































































































































































































































Reviews:

No comments