Hioki ST4030, Instruction Manual, Page: 37 / 256

29
Current Table Selection
3.2 Current Table Selection
Sets the table used as the test conditions as the current table (i.e., the table to be used from now
on).
(Measurement screen) [MODE] > [SETTING] or [TEST] > [TABLE]
1
2
1
Tap the table that is to be set as the current table.
The table selected will be surrounded by a yellow frame.
2
Tap [SELECT] .
The characters in the table selected as the current table will turn light blue.
Test conditions settings mode: Saves the settings and the master waveform to the selected current table.
Test mode: Implements tests using the master waveform in the selected current table.
3
Switching
Test Conditions (T
able Functions)