Hioki SM7860 Series, Instruction Manual

Page: 59 / 64

55
Error Display
6.2 Error Display
When an error occurs, it will be displayed in the last row on the screen.
Error Display Description Remedy
ERROR:001 Call Service Center Backup data corrupt
Please contact your authorized
Hioki distributor or reseller.
ERROR:002 Call Service Center Backup data write failure
ERROR:007 Call Service Center
Power source controller internal
communication failure
ERROR:011 Call Service Center Power supply circuit A overcurrent Check “If the device malfunctions/
before you have it repaired”
(p. 53)
ERROR:012 Call Service Center Power supply circuit B overcurrent
6.3 Repairs, Inspections, and Cleaning
WARNING
Touching any of the high-voltage points inside the device is very dangerous. Customers
are not allowed to modify, disassemble, or repair the device. Doing so may cause a fire,
electric shock, or injury.
Cleaning
CAUTION
Clean the vents periodically to avoid blockage. If a vents becomes clogged, the devices
internal cooling is impeded, and damage may result.
• To clean the device, wipe it gently with a soft cloth moistened with water or mild detergent.
• Wipe the screen gently with a soft, dry cloth.
Disposal
Handle and dispose of the device in accordance with local regulations.
Calibrations
The calibration period varies depending on the status of the device or installation environment. We
recommend that the calibration period be determined in accordance with the status of the device or
installation environment.
Please contact your Hioki distributor to have your device periodically calibrated.