Hioki RM3545, Instruction Manual, Page: 245 / 364

12.1 Connecting the Printer to the Instrument
237
12
Before connecting a printer, read "Operating Precautions" (p.12) carefully.
Printer
The requirements for a printer to be connected to the instrument are as follows.
Confirm compatibility and make the appropriate settings on the printer before connecting it
to the instrument.
See: "Instrument Settings" (p. 239)
•
Interface..................................... RS-232C
•
Characters per line .................... At least 48
•
Communication speed ............... 9600 bps (default)/ 19,200bps/ 38,400bps/ 115,200bps
•
Data bits..................................... 8
•
Parity.......................................... none
•
Stop bits ..................................... 1
•
Flow control ............................... none
•
Control codes............................. Capable of directly printing plain text
•
Message terminator (delimiter) .. CR+LF
Printing
(Using an RS-232C Printer)
Chapter 12
12.1 Connecting the Printer to the Instrument
Printing (p.240)
•
Measured values and
comparator judgments
•
List of measurement
conditions and set-
tings
•
Statistical calculation
results
Connecting
the printer to
the instrument
Make instrument
settings (p.239) Make printer
settings