Hioki RM3545, Instruction Manual, Page: 128 / 364

6.1 Saving Measurement Conditions (Panel Save Function)
120
6.1 Saving Measurement Conditions
(Panel Save Function)
1
Open the Panel List Screen.
2
Save the measurement conditions.
3
Enter the panel name.
(If you enter the number of a previously saved panel, a warning message will
be displayed.)
The Panel List Screen
appears.
Save the conditions.
Selection
1
2
Enter a number from 0 to 9
Enter a letter from A to Z, or
an underbar character ( _ ).
Delete 1 character.
1
Move the cursor to the character
you wish to set with the left and
right cursor keys. Change the
character with the up and down
cursor keys.
Change
characters.
Move
among
characters.
2
Accept
( Cancel)