Hioki RM3545, Instruction Manual, Page: 127 / 364

119
6
Current measurement conditions can be saved and loaded using the panel load function
from the key operations, communications commands, or EXT-I/O.
The instrument can save up to 30 sets (panel number: 1 to 30) of measurement conditions
when not using the multiplexer or up to 8 sets (panel number: 31 to 38) when using the mul-
tiplexer. This data is retained even if the instrument is turned off.
Settings that can be saved with the Panel Save function
Saving and Loading Panels
(Saving and Loading
Measurement Conditions)
Chapter 6
•
Panel name
•
Save time and date
•
Resistance range
•
100 M
Ω
high-precision mode
•
Low-Power resistance measurement (LP)
•
Switching measurement currents
•
Measurement speed
•
Zero-adjustment (Loading of these values can be disabled.) (p.122)
•
Averaging
•
Delay
•
Temperature correction (TC)
•
Offset voltage compensation (OVC)
•
Scaling
•
Self-calibration settings
•
Contact Improver
•
Contact check
•
Comparator
•
BIN settings
•
Judgment beeper
•
Auto hold
•
Temperature conversion (
Δ
T)
•
Statistical calculations settings
•
Multiplexer settings (including channels)