Hioki RM3542, Instruction Manual, Page: 35 / 218

3.3 Setting the Measurement Speed
29
3
The measurement speed can be set to FAST, MED (medium), or SLOW. A slower measurement
speed provides greater measurement precision, and a faster measurement speed results in greater
susceptibility to environmental noise. Ensure that measurement cables and the sample are suffi-
ciently shielded.
3.3 Setting the Measurement Speed
1
Open the Basic Settings screen.
2
Select the measurement speed.
3
Return to the Measurement screen.
Relationship Between Measurement Range and Speed
(factory defaults)
Measure-
ment Range
LOW POWER: OFF LOW POWER: ON
FAST MED SLOW FAST MED SLOW
100m

3.8 ms 13 ms
43 ms
36 ms
  
Integration time can be optionally set
for each range (p. 44).
Upper value:
for 50-Hz power line frequency
Lower value:
for 60-Hz power line frequency
Tolerance:
±
10%
±
0.2 ms
1000m

2.0 ms 6.4 ms
41 ms
35 ms
2.5 ms 12 ms
42 ms
35 ms
10

1.6 ms 6.0 ms
41 ms
34 ms
2.5 ms 12 ms
42 ms
35 ms
100

0.9 ms 3.6 ms
21 ms
17 ms
1.7 ms 6.1 ms
41 ms
34 ms
1000

0.9 ms 3.6 ms
21 ms
17 ms
7.2 ms 12 ms
47 ms
40 ms
10k

1.0 ms 3.6 ms
21 ms
17 ms
  
100k

1.3 ms 3.8 ms
21 ms
18 ms
  
1000k

2.5 ms 6.0 ms
21 ms
18 ms
  
10M

5.3 ms
23 ms
20 ms 23 ms
20 ms
  
100M

26 ms
22 ms 46 ms
39 ms 86 ms
72 ms
  
The Basic Settings screen appears.
1
Selection
2
See table below
(default)
Press the up/down cur-
sor keys to change the
setting.