Hioki RM3542-50, Instruction Manual

Page: 155 / 234

9.7 Message Reference
149
9
Back up measurement settings
Syntax Command
:SYSTem:BACKup
Description Stores current measurement settings in non-volatile memory. The measurement condition
setting using communication commands are not backed up. (The settings will be lost when
the main power is turned off.)
Use this command to store the settings as occasion demands.
Compare and Query Measurement Settings on Two Instruments (Settings Moni-
tor Function)
Set and Query Settings Comparison
Syntax Command
:SYSTem:SETMonitor
<1/ 0/ ON/ OFF>
Query
Response
:SYSTem:SETMonitor?
<ON/ OFF>
Description This function compares the settings (such as comparator) of two instruments to determine
whether they are the same.
See: "4.10 Comparing the Measurement Settings of Two Instruments (Settings Monitor
Function)" (p. 59)
Example
:SYST:SETM ON
Set Settings Monitor Order (1st and 2nd Stages)
Syntax Command
:SYSTem:SETMonitor:ORDer
<1/2>
Query
Response
:SYSTem:SETMonitor:ORDer?
<1/ 2 (NR1)>
Example
:SYST:SETM:ORD 1
Set and Query Settings Monitor Tolerance
Syntax
Command
:SYSTem:SETMonitor:ALLowance
<0 to 9.999(%)>
Query
Response
:SYSTem:SETMonitor:ALLowance?
<0.0000E+0 to 9.9990E+0 (NR3)>[%]
Example
:SYST:SETM:ALL 0.5
Return to Local Control
Syntax
Command
:SYSTem:LOCal
Description
Disables communications remote control and re-enables local control. The panel keys are
re-enabled.
Example
:SYST:LOC
Set and Query Measurement-Synchronized Data Output
Syntax Command
:SYSTem:DATAout
<1/ 0/ ON/ OFF>
Query
Response
:SYSTem:DATAout?
<ON/ OFF>