Hioki RM3542-50, Instruction Manual

Page: 141 / 234

9.7 Message Reference
135
9
Messages specific to the RS-232C or GP-IB interface are denoted by or .
(1) System Data Command
(2) Internal Operation Command
Shared Commands
Query the Device ID (Identification Code)
Syntax Query
∗
IDN?
Response <Manufacturer's name>, <Model name>, <0>, <Software version>
Example
HIOKI,RM3542A,0,V1.00
The Device ID is HIOKI RM3542A, 0, software version: 1.00.
Note The response message has no header.
Initialize Device
Syntax Command
∗
RST
Description Command Resets the instrument to its initial state.
Note
•
The communications protocol is not initialized.
•
Initialized settings are not backed up.
•
The following methods are available if backup is needed:
Method1. Use the
:SYSTem:BACKup
command
Method2. Use the
:SYSTem:RESet
command
Execute Self-Test and Query the Result
Syntax Query
∗
TST?
Response <0 to 7 (NR1)>
Description Perform the instrument self-test and return the result as a numerical value from 0 to 7.
Returns zero when no error occurs.
Example ∗
TST?
4
A non-volatile memory error occurred.
Correct measurement may not be possible. Obtain repair before further use.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
unused unused unused unused unused
non-volatile
memory
RAM ROM