Hioki PW3360-20 Instruction Manual Download

Page: 85 / 224

5.1 Viewing and Using the Measurement Screen

apter 5 V

iewing M

easure

ment Dat

The PW3360 allows you to view measured values, waveforms, and graphs on the

Measurement screen.

Viewing Measurement



Data

Chapter 5

5.1

Viewing and Using the Measurement Screen

Holds measured values. While values are being
held, the HOLD indicator will turn red.

Allows you to select a Measurement screen.

Selects a
screen name
from a list.

Enter

Switches to the Measurement
screen and changes the Mea-
surement screen.

Current channel

Current range

Clamp sensor

• If a setting is changed while measured values are being held, the

hold will be canceled.

• The time display is not fixed while measured values are being

held.

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands