Hioki PW3360-20, Instruction Manual, Page: 78 / 224

4.3 Changing Recording (Save) Settings
70
Recording stop method
Sets the method used to stop recording.
Specifying a time
1
Move the cursor to the recording
start method, press the
[ENTER] key, and select
[TIME] .
2
Move the cursor to the time set-
ting you wish to change and
press the [ENTER] key.
The cursor will change to the size of one
digit, and you will be able to change the
setting.
3
Change the setting with the cursor keys and then accept the
new value with the [ENTER] key.
Change other settings as necessary.
Selection
MANUAL Stops recording when the [START/STOP] key is pressed.
TIME
Selecting [TIME] causes a dialog box for setting the time
to be displayed. Recording is stopped at the set time (YY/
MM/DD hh:mm). If the set time has already passed when
recording is started, the “manual” stopping method is
used.
The maximum recording and measurement time is up to one year.
Recording will stop automatically in one year.