Hioki PW3360-20 Page 137 Instruction Manual Download

Page: 137 / 224

129

Chapter 10

Using Communicat

ions (

SB/LAN)

Since the PW3360 ships standard with USB and LAN interfaces, you can connect

the instrument to a computer to download data and control the instrument.

Capabilities with a USB connection

• Copy data to a computer (the instrument’s SD memory card and internal memory

will be recognized as removable disks).

See:

10.1, "Copying Data to a Computer (USB)" (p. 130)

• Using free PW3360 Settings and Download Application, configure the instrument

and download data.

See:

10.4, "Using the PW3360 Settings and Download Application (USB)" (p. 134)

Capabilities with a LAN connection

• Using an Internet browser, control the instrument remotely.

• Using free PW3360 Settings and Download Application, configure the instrument

and download data.

See:

10.6, "Using the PW3360 Settings and Download Application (LAN)" (p. 144)

Using Communications



(USB/LAN)

Chapter 10

USB or LAN interface

Recording data

Control signal

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands