Hioki PW3336-01, Instruction Manual

Page: 119 / 206

3.10 Other Functions
113
Factory Settings
Parameter Setting
Display area a AC+DC CH1 V
Display area b AC+DC CH1 A
Display area c AC+DC CH1 W
Display area d AC+DC CH1 PF
Voltage range 300 V range (auto-range off)
Current range 20 A range (auto-range off)
Wiring mode 1P2W
Synchronization source CH1: U1; CH2: U2; CH3; U3
Current input All direct input for CH1 to CH3 (off)
VT ratio 1 (OFF)
CH1 to CH3: 1 (OFF)
CT ratio 1 (OFF)
CH1 to CH3 1 (OFF)
Frequency range CH1 to CH3: 500 Hz
Timeout CH1 to CH3: 0.1 sec.
Integration time 0000.00 (10,000 hr.)
Number of averaging iterations (AVG) 1 (OFF)
Harmonic analysis upper limit order 50th
External synchronization function OFF
D/A output U, I, P terminals: Level output
DA1: S1; DA2: S2; DA3: S3
Integration Reset state
Display hold OFF
Maximum value/minimum value display OFF
Key-lock OFF
LAN-related settings IP address 192.168.1.1
Subnet mask 255.255.255.0
Default gateway 0.0.0.0
RS-related settings RS communications speed 38,400 bps
GP-IB address
1
Default LAN, RS-232C, and GP-IB settings are shown. These settings will not be initialized when a system
reset is performed.