Hioki PD3259-50, Instruction Manual

Page: 53 / 86

47
Power-On Options
Switching the phase display (Phase display
switching function)
This section describes how to choose between two phase labeling
systems, one using “ ” and one using “ ”.
Phase display “ ” “ ”
Line-to-line voltage
display
, , , ,
1
Turn on the instrument while
holding down the Fn key.
2
Press the HOLD key to choose the
phase labeling system.
[rst] ↔ [123]
3
Press the Fn key.
4
Press the Fn key again.
After the power-on screen is displayed, the
line-to-line voltage measurement screen will
be displayed.
The phase display switching function setting will be saved and
also applied at the next startup of the instrument.
HIOKI PD3259C961-00