Hioki MR8904, Instruction Manual

Page: 55 / 72

6.1 Checking and Editing Settings
51
This chapter describes how to use a Memory HiCorder to check settings sent from the MR8904 CAN Edi-
tor and how to configure frame transmission timing.
The MR8875 Memory HiCorder is used as an example.
On the MR8875, display [Setting Display]

[System]

[Initialize]

[CAN Unit Setting List] .
You can check and edit settings configured with the MR8904 CAN Editor.
Configuring Settings with the
Memory HiCorder
Chapter 6
6.1 Checking and Editing Settings
Set the CAN communications conditions.
See:
"Setting CAN communications conditions" (p.38)
Allocate channels by creating an MR8904 analog assign list and MR8904 logic assign list
from the MR8904 register list.
See:
"Allocating channels (Creating MR8904 analog/logic assign lists)" (p.40)
Create an MR8904 send list (which will serve as the transmission
condition settings).
See:
"Configuring transmission (creating an MR8904 Send list)"
(p.42)