Hioki MR8904, Instruction Manual

Page: 51 / 72

5.6 Sending and Receiving Condition Settings
47
The MR8904 can also receive condition settings from the Memory HiCorder.
The message to the right will be displayed when the
Memory HiCorder is in the process of performing
measurement or calculations.
Resend the settings once the measurement, calcu-
lations, or other process completes.
Receiving condition settings
1
Click [Receive] .
The MR8904 settings information with which the
Memory HiCorder is currently configured will begin
to load.
The dialog box to the right will be displayed while
the data is loading.
Once data has been loaded into the window, the
Condition Settings window display will be updated.
When receiving conditions, the upper and lower limit values on the display will be set to ini-
tial values calculated from the bit length, bit rate, and offset.